arrow_forward Click here for the product overview page.

Manual

    Basic Operation

    Change selection by dragging

    In the selection UI consisting of lamps and button(s), you can change the selection not only by using the button(s) but also by dragging.

    The sound is not affected during selection by dragging. When you touch up, the drag selection will be reflected in the sound.

    Finer Resolution for Dragging

    By dragging horizontally, you can finely adjust the parameter values.

    This function is not available when "Rotary Knob mode" is set to "Circular".

    How to reset the parameter to the default value.

    A quick double tap will restore the parameter value to its default value.

    Rotary Knob mode

    You can change the operation method of the rotary knob on the setting screen.

    Preset

    When you first open the preset browser, you will see three folders: Factory, User and Program.

    Factory
    The Factory folder contains factory presets.
    User
    The "User" folder is where you can save your presets. Initially nothing is saved in this folder. When you import presets, they are also saved in this folder.
    Program
    The Program folder is a place to store presets that load when MIDI program changes are received. → Detail

    Header Bar

    Preset Browser

    New Folder...
    You can create new folders under the User folder.
    Save As...
    Save the currently loaded preset. Presets cannot be saved in the Factory folder.
    New
    Loads an initialized sound.
    Recall
    Recalls the sound that was loaded before opening the browser.
    ALT
    Displays a menu for editing the preset library.

    Rename...
    Rename the selected preset. Not available for multiple selections.
    Export...
    Export the selected preset. Not available for multiple selections.
    Duplicate
    Duplicate the selected preset. Not available for multiple selections.
    Move
    Move the selected presets.
    Delete
    Delete the selected presets.

    Display order of presets

    The display order in the preset browser is sorted in alphabetical order, with numbers from 0 to 9 first, then capital letters A to Z, and finally a to z. Therefore, you can sort the order by putting a number before the name.

    You can share your presets with other users.

    1. Tap ALT button.
    2. Select only one preset or folder you want to export. You cannot export with multiple selections.
    3. Tap Export button
    4. You can export the presets to Mail, iCloud, etc. via Share Extension

    You can save presets created by other users in your user presets folder.

    • You can import presets via the File App, Mail and other applications that support Share Extension.
    • Imported presets are automatically saved in the User folder.

    Programs Folder

    In the "Programs" folder you can define which presets will be loaded when a MIDI program change message is received. The program number corresponds to the order of the sound preset in the "Program" folder.

    You can sort the order of the program number by putting a number before the name. → Display order of presets

    AUv3 host preset list

    The presets stored in this folder can also be displayed in the preset list of the AUv3 host. On the settings screen, you can choose to display the factory presets or the contents of the program folder.

    Global Settings

    You can open the settings screen by tapping the gear icon on the top right of the screen.

    NOTE: On the plug-in mode setting screen, only the items that can be set are displayed. This image is the setting screen when launched as a standalone app.

    • Master Volume

      This setting is not affected by changing the sound preset.

    • Sync Method (Available when launched as an app)
      • Internal
      • MIDI
      • Inter-App Audio
      • Ableton Link

      You can set the synchronization method of the arpeggiator.

    • Tempo (Available when launched as an app)

      When the synchronization method is internal sync or Ableton Link, you can change the tempo of the arpeggiator.

    • Audio Buffer Size (Available when launched as an app)

      The audio buffer size affects the amount of latency and the CPU usage. Higher setting will reduce crackling noise at high CPU usage, but also cause more latency.

    • Background Audio (Available when launched as an app)

      If background audio is enabled, this app will consume battery power significantly even if other apps are running or if your screen is turned off.

    • MIDI Input Ports (Available when launched as an app)

      You can set which MIDI input port to receive.

    • MIDI Input Channel (Available when launched as an app)

      When the OMNI is OFF this app will receive only on the currently selected channel.

    • Bluetooth MIDI Device (Available when launched as an app)

      You can connect Bluetooth MIDI compatible controllers.

    • MIDI Mapping - File

      You can save/load MIDI mapping settings.

    • MIDI Mapping - Takeover Mode
      • None

        As soon as you operate the MIDI controller, it will be reflected to the parameter. If the MIDI controller value and the parameter value are different, the parameter value will jump.

      • Pickup

        If the MIDI controller value is different from the parameter value, the parameter value will not be changed until the MIDI controller value crosses the currently set parameter value. However, even in this mode, if the MIDI controller is operated when the parameter value is out of the range set by the MIDI mapping, the set parameter value jumps to the boundary value of the range.

    • Include the MIDI mapping settings in the sound preset file
      • When Saving:

        ON: Save the MIDI mapping settings in the sound preset file.

        OFF: Save the sound preset file without including the MIDI mapping settings.

      • When Loading:

        ON: If there are MIDI mapping settings in the sound preset file, it will be loaded. If there are no MIDI mapping settings in the sound preset file, the current MIDI mapping settings will not change.

        OFF: Even if there are MIDI mapping settings in the sound preset file, it will not be loaded.

    • Knob Mode

      How to operate the knob Switches between linear mode and circular mode.

    • Display in a pop-up window (Available when launched as an AUv3 plugin)

      Set whether to use pop-up display when running as AUv3. If this is set to OFF, the screen will not close even if you interact with the UI of the host app. Turn it off if you want to adjust the tone while playing the keyboard of the host app.

    • About

      Display version information, license information, etc.

    MIDI Mapping

    You can assign the MIDI controller knobs to the parameters.

    MIDI Learning Mode

    1. Enter MIDI learning mode by tapping the MIDI Learn button.

    2. Touch the on-screen control you wish to map.
    3. Adjust the slider or knob on your MIDI controller. (MIDI CC)
    4. Repeat above steps as required.

    MIDI Map Setting Panel

    In MIDI learning mode, Press and hold the knob or other control to open the setting panel.

    To delete the assigned MIDI mapping, tap the control several times.

    MIDI Map Range Setting

    The value given by the MIDI controller can be changed to a different value.

    Save MIDI Mapping

    You can save the created MIDI mapping from the setting screen.

    When displayed in a large screen layout, the main parameters of each tap are displayed at the bottom of the screen. Detailed parameters are displayed by tapping the button at the top of the screen.

    Block Diagram

    Parameters

    Input

    Input Level
    Adjust the input volume.
    Bypass
    Press the button to output the input signal directrly.

    Pre-Delay

    When displayed in a large screen layout, the main parameters of each tap are displayed at the bottom of the screen. Detailed parameters are displayed by tapping the button at the top of the screen.

    Feedback Tap

    Time Mode
    Switches the delay time range.
    Time (L/R)
    Adjust the delay time.
    Modulation
    Adjusts the depth of the delay time modulation.
    Rate
    Adjusts the rate for delay time modulation.
    Sync
    If the button is ON, the moduration rate will be synchronized to the tempo.
    Dumping
    Turning the knob clockwise causes higher frequencies to fade faster than low frequencies. Turning the knob counterclockwise causes lower frequencies to fade faster than high frequencies.
    Phase(Inverse)
    When On, a signal of opposite phase is output.
    Level
    Adjust the feedback level. Minimum feedback gives a single echo. Increasing this parameter produces repeating echoes.
    Eary Reflections

    PreDelay
    Adjusts the pre-delay time of early reflections.
    Density
    Adjusts the density of early reflections.
    Modulation
    Adjusts the depth of the delay time modulation.
    Rate
    Adjusts the rate for delay time modulation.
    Sync
    If the button is ON, the moduration rate will be synchronized to the tempo.
    Spread
    Adjusts the left and right spread of the early reflections.
    HPF/LPF
    Adjusts the cutoff frequency of the filter.
    →Delay, →Delay(Cross), →Reverb

    Time Mode
    Switches the delay time range.
    Time (L/R)
    Adjust the delay time.
    Modulation
    Adjusts the depth of the delay time modulation.
    Rate
    Adjusts the rate for delay time modulation.
    Sync
    If the button is ON, the moduration rate will be synchronized to the tempo.
    Phase(Inverse)
    When On, a signal of opposite phase is output.

    Main-Delay

    When displayed in a large screen layout, the main parameters of each tap are displayed at the bottom of the screen. Detailed parameters are displayed by tapping the button at the top of the screen.

    Feedback Tap, CrossFeedback Tap

    Time Mode
    Switches the delay time range.
    Time (L/R)
    Adjust the delay time.
    Modulation
    Adjusts the depth of the delay time modulation.
    Rate
    Adjusts the rate for delay time modulation.
    Sync
    If the button is ON, the moduration rate will be synchronized to the tempo.
    Dumping
    Turning the knob clockwise causes higher frequencies to fade faster than low frequencies. Turning the knob counterclockwise causes lower frequencies to fade faster than high frequencies.
    Phase(Inverse)
    When On, a signal of opposite phase is output.
    Level
    Adjust the feedback level. Minimum feedback gives a single echo. Increasing this parameter produces repeating echoes.
    Tap 1, 2, 3

    Time Mode
    Switches the delay time range.
    Time (L/R)
    Adjust the delay time.
    Modulation
    Adjusts the depth of the delay time modulation.
    Rate
    Adjusts the rate for delay time modulation.
    Sync
    If the button is ON, the moduration rate will be synchronized to the tempo.
    Phase(Inverse)
    When On, a signal of opposite phase is output.
    Tap 4, 5, 6(Cross)

    Time Mode
    Switches the delay time range.
    Time (L/R)
    Adjust the delay time.
    Time Modulation
    Adjusts the depth of the delay time modulation.
    Rate
    Adjusts the rate for delay time modulation.
    Sync
    If the button is ON, the moduration rate will be synchronized to the tempo.
    Frequency Modulation
    Adjusts the depth of the cutoff frequency modulation.
    LPF/HPF
    Adjusts the cutoff frequency of the filter.
    Resonance
    Emphasizes the cutoff frequency.
    Phase(Inverse)
    When On, a signal of opposite phase is output.
    Level
    Adjust the feedback level. Minimum feedback gives a single echo. Increasing this parameter produces repeating echoes.
    Filter (for Taps 1-3)

    LPF/HPF
    Adjusts the cutoff frequency of the filter.
    Modulation
    Adjusts the depth of the cutoff frequency modulation.
    Rate
    Adjusts the rate for delay time modulation.
    Sync
    If the button is ON, the moduration rate will be synchronized to the tempo.
    Resonance
    Emphasizes the cutoff frequency.
    Drive
    Adjusts the overdrive intensity.
    Mix
    Adjusts the mix of dry and wet signal.
    Panner (for Taps 4-6)

    PAN
    Adjust the PAN.
    Modulation
    Adjusts the depth of the PAN modulation.
    Rate
    Adjusts the rate for delay time modulation.
    Sync
    If the button is ON, the moduration rate will be synchronized to the tempo.

    Reverb

    Mixer
    Adjusts the signal balance input to the reverb.
    Room Size
    Adjusts the size of the room that determines the reverberation density, etc.
    Time
    Adjusts the duration of the reverberation tail.
    HF Damp
    Adjusts the high frequency attenuation of the reverberation tail.
    Early Refrections
    Level
    Adjust the early refrections volume.
    Filter
    Adjust the filter passband of the early refrections.
    Tail
    Level
    Adjust the reverberation tail volume.
    Filter
    Adjust the filter passband of the reverberation tail.

    Output

    Mixer
    Adjusts the signal balance input to the output.
    Wet / Dry
    Adjusts the level of the effect and dry sounds.
    home
    keyboard_double_arrow_up